Products
LEO 2AC150H
LEO 2AC150H two-stage centrifugal pump, 1.5 kW, three phase. Price and availability on enquiry.
LEO 2AC150H technical information
Two-stage centrifugal pump for clean-water transfer, supply, pressure boosting, irrigation and circulation. Confirm the duty point and the supplied motor nameplate.
| Motor output | 1.5 kW / 2 HP |
|---|---|
| Motor phase | Three phase |
| Supply voltage and frequency | Confirm the supplied motor nameplate |
| Liquid temperature limit | 40 °C in the LEO Europe sheet; confirm the supplied variant before use above 40 °C |
| Ambient temperature limit | 40 °C |
| Manufacturer-listed suction lift | Up to 8 m; actual lift depends on site conditions and NPSH |
| Insulation / protection | Class F / IPX4 |
Cast-iron pump body and support with anti-rust treatment, stainless-steel shaft, carbon/ceramic seal and copper motor windings. Built-in thermal protection applies to single-phase versions.
2AC150H hydraulic curve and dimensional drawing
Hydraulic points are transcribed from the manufacturer technical table, with straight lines between published points. Blank source cells are omitted. The last published flow point is not a declared maximum flow. No extrapolation is shown.
2AC150H hydraulic data
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 63.5 |
| 1.2 | 60.5 |
| 1.8 | 58.5 |
| 2.4 | 56.5 |
| 3 | 54 |
| 3.6 | 51.5 |
| 4.2 | 48.5 |
| 4.8 | 45 |
| 5.4 | 41 |
| 6 | 37.5 |
| 6.6 | 33.5 |
| 7.2 | 29 |
2AC150H installation dimensions
| L | 400 mm |
|---|---|
| L2 | 80 mm |
| H | 262 mm |
| H1 | 112 mm |
| W | 225 mm |
| W1 | 185 mm |
Dimensions checked against the manufacturer's dimensional table. The mounting offset is labelled L2 on the drawing and L1 in some catalogue tables. Confirm supplied configuration before setting out pipework or mounting holes.
Packaging and transport
| Gross packaged weight | 27 kg |
|---|---|
| Package length × width × height | 445 × 255 × 300 mm |
| Sheet-listed container quantity | 636 units per 20-foot TEU |