Products
LEO 2ACm75
LEO 2ACm75 two-stage centrifugal pump, 0.75 kW, single phase. Price and availability on enquiry.
LEO 2ACm75 technical information
Two-stage centrifugal pump for clean-water transfer, supply, pressure boosting, irrigation and circulation. Confirm the duty point and the supplied motor nameplate.
| Motor output | 0.75 kW / 1 HP |
|---|---|
| Motor phase | Single phase |
| Supply voltage and frequency | Confirm the supplied motor nameplate |
| Liquid temperature limit | 40 °C in the LEO Europe sheet; confirm the supplied variant before use above 40 °C |
| Ambient temperature limit | 40 °C |
| Manufacturer-listed suction lift | Up to 8 m; actual lift depends on site conditions and NPSH |
| Insulation / protection | Class F / IPX4 |
Cast-iron pump body and support with anti-rust treatment, stainless-steel shaft, carbon/ceramic seal and copper motor windings. Built-in thermal protection applies to single-phase versions.
2ACm75 hydraulic curve and dimensional drawing
Hydraulic points are transcribed from the manufacturer technical table, with straight lines between published points. Blank source cells are omitted. The last published flow point is not a declared maximum flow. No extrapolation is shown.
2ACm75 hydraulic data
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 45 |
| 1.2 | 42.5 |
| 1.8 | 40 |
| 2.4 | 37 |
| 3 | 33.5 |
| 3.6 | 28.5 |
| 4.2 | 23 |
| 4.8 | 15 |
2ACm75 installation dimensions
| L | 336 mm |
|---|---|
| L2 | 72 mm |
| H | 231 mm |
| H1 | 100 mm |
| W | 181 mm |
| W1 | 145 mm |
Dimensions checked against the manufacturer's dimensional table. The mounting offset is labelled L2 on the drawing and L1 in some catalogue tables. Confirm supplied configuration before setting out pipework or mounting holes.
Packaging and transport
| Gross packaged weight | 16.8 kg |
|---|---|
| Package length × width × height | 385 × 215 × 270 mm |
| Sheet-listed container quantity | 1190 units per 20-foot TEU |