Products
LEO AC150L
1.5 kW three phase clean-water centrifugal pump (large-flow version). Individual hydraulic curve below. Installation dimensions require confirmation. Price and availability by enquiry.
LEO AC150L Centrifugal Pump
For clean-water transfer, irrigation, circulation and pressure boosting. Match the required flow and total dynamic head to this model's curve. Product photograph represents the range; configuration varies by model.
| Model | AC150L |
|---|---|
| Motor power | 1.5 kW |
| Motor phase | Three phase |
| Head at zero flow | 37.5 m |
| Last tabulated duty point | 12.6 m³/h at 19 m |
| Suction / discharge | 1 1/2 inch / 1 inch |
| Pump body | Cast iron with anti-rust treatment |
| Shaft | AISI 304 stainless steel |
| Maximum liquid temperature | 60 °C |
| Insulation / enclosure | Class F / IPX4 |
Motor has copper windings; single-phase versions include thermal protection. The series lists up to 8 m suction lift; achievable lift depends on altitude, water temperature and pipe losses. Confirm supply voltage, frequency and local availability before ordering. Shut-off head is at zero flow and is not a recommended operating duty.
AC150L hydraulic performance
Redrawn from LEO's published technical table. Dots show published values; straight lines interpolate. No extrapolation beyond the published points.
The source table's final flow column prints 12.6 m³/h and 200 L/min, which are inconsistent. The curve follows the printed m³/h values; confirm the high-flow end before final selection.
AC150L published flow and head values
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 37.5 |
| 0.6 | 37.2 |
| 0.9 | 37 |
| 1.2 | 36.9 |
| 1.8 | 36.6 |
| 2.4 | 36.2 |
| 3 | 35.8 |
| 3.6 | 35.4 |
| 4.2 | 35 |
| 4.5 | 34.8 |
| 4.8 | 34.7 |
| 5.4 | 34 |
| 6 | 33.3 |
| 6.6 | 32.5 |
| 7.2 | 31.5 |
| 7.8 | 30.5 |
| 8.4 | 29.5 |
| 9 | 28.2 |
| 9.6 | 27 |
| 10.8 | 24 |
| 11.7 | 21 |
| 12.6 | 19 |
AC150L installation dimensions
The manufacturer sheet does not give a separate dimensional row for AC150L. Ask Krächtig to confirm the drawing for the supplied three-phase version before setting out mounting holes or pipework.