Products
LEO AC60
Motor rating requires confirmation three phase clean-water centrifugal pump. Individual hydraulic curve below. Installation dimensions require confirmation. Price and availability by enquiry.
LEO AC60 Centrifugal Pump
For clean-water transfer, irrigation, circulation and pressure boosting. Match the required flow and total dynamic head to this model's curve. Product photograph represents the range; configuration varies by model.
| Model | AC60 |
|---|---|
| Motor power | Motor rating requires confirmation; manufacturer table shows 0.5 kW while the earlier local listing shows 0.6 kW. |
| Motor phase | Three phase |
| Head at zero flow | 27 m |
| Last tabulated duty point | 5.4 m³/h at 10 m |
| Suction / discharge | 1 inch / 1 inch |
| Pump body | Cast iron with anti-rust treatment |
| Shaft | AISI 304 stainless steel |
| Maximum liquid temperature | 60 °C |
| Insulation / enclosure | Class F / IPX4 |
Motor has copper windings; single-phase versions include thermal protection. The series lists up to 8 m suction lift; achievable lift depends on altitude, water temperature and pipe losses. Confirm supply voltage, frequency and local availability before ordering. Shut-off head is at zero flow and is not a recommended operating duty.
AC60 hydraulic performance
Redrawn from LEO's published technical table. Dots show published values; straight lines interpolate. No extrapolation beyond the published points.
AC60 published flow and head values
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 27 |
| 0.6 | 26.5 |
| 0.9 | 26.2 |
| 1.2 | 26 |
| 1.8 | 25 |
| 2.4 | 24.5 |
| 3 | 22.5 |
| 3.6 | 20 |
| 4.2 | 17 |
| 4.5 | 15.5 |
| 4.8 | 14 |
| 5.4 | 10 |
AC60 installation dimensions
The manufacturer sheet does not give a separate dimensional row for AC60. Ask Krächtig to confirm the drawing for the supplied three-phase version before setting out mounting holes or pipework.