Products
LEO LSWm30(A)
LEO LSWm30(A). Model selection, price and availability on enquiry.
LEO LSWm30(A) — technical information
Application
Submersible sewage pump for wastewater, rainwater and sewage containing solid particles. Suitable applications include building drainage, construction sites, municipal drainage and industrial wastewater transfer, subject to the required duty point and liquid conditions.
Model specifications
| Motor power | 0.25 kW / 0.37 HP |
|---|---|
| Supply listed in technical sheet | 180–220 V, 50 Hz; single phase |
| Outlet | G1.5 |
| Maximum flow | 12 m³/h |
| Maximum head | 9 m |
| Maximum particle diameter | 15 mm |
| Maximum liquid temperature | 40 °C |
| Automatic operation | A designation: float-switch operation |
Maximum flow and maximum head occur at different operating points and must not be treated as a combined duty point. Confirm the supplied motor voltage before ordering.
Pump construction
Stainless-steel exterior shell, cast-iron hydraulic body with anti-rust treatment, AISI 304 shaft and fixed cable arrangement.
Motor
| Windings | Copper |
|---|---|
| Thermal protection | Built-in protection for the single-phase motor |
| Insulation class | F |
| Enclosure protection | IPX8 |
Materials
| Pump body, impeller, oil chamber and cover, top cover | HT200 cast iron |
|---|---|
| Shaft, cable cover and handle | AISI 304 stainless steel |
| Mechanical seal | SiC/carbon + carbon/ceramic |
| Connector | ABS |
| Upper cover | ADC12 |
| Capacitor clamp | Q235 |
| Cable sheathing | Neoprene |
| Rotor | 45# steel + AISI 304 |
| Exhaust valve | HP59-1 |
Product dimensions
| Length × width × height | 221 × 158 × 362 mm |
|---|---|
| Discharge designation | G1.5/40 |
Packaging and transport
| Package length × width × height | 235 × 230 × 425 mm |
|---|---|
| Gross packaged weight | 10.45 kg |
| Sheet-listed container quantity | 1218 units per 20-foot TEU |
LSWm30(A) hydraulic performance
This individual reference curve uses approximate graph readings from the orange curve explicitly labelled for LSWm30A in the locally published LEO 50 Hz sheet. Values are rounded to 0.1 m head, with graph-reading uncertainty of approximately ±0.25 m; they are not published numerical test points. Only the sampled portion of the original curve is shown, with no extrapolation.
Source discrepancy: the manufacturer’s plotted head/flow coverage does not fully coincide with its tabular maximum head and maximum flow. The original plot is included for comparison; its values have not been rescaled or extended to force agreement with the table. Tabular maxima below remain separate limits, not a simultaneous duty point. Confirm the applicable supplied version and duty with Krächtig before ordering.
LSWm30(A) dimensional drawing
The manufacturer’s outline is shown with the dimensions listed for LEO LSWm30(A). Confirm installation clearances before ordering.