Products
LEO XKP554E
LEO XKP554E. Model selection, price and availability on enquiry.
LEO XKP554E
Model in the XKP Pool Pump Range.
Model technical data
| Published power | 600 W (source power column) |
|---|---|
| Application | Domestic swimming-pool and spa water circulation with suitable filtration |
| Pump body | Engineering plastic |
| Liquid temperature | 5–50 °C |
| Ambient temperature | Up to 40 °C |
| Published maximum suction height | 3.5 m; actual suction conditions must be checked |
| Motor winding | Copper or aluminium, depending on supplied version; confirm nameplate |
| Insulation / enclosure | Class F / IPX5 |
| Thermal protection | The sheet specifies built-in thermal protection for single-phase motors; confirm supplied configuration |
| Electrical supply | Voltage, phase and frequency require supplied-nameplate confirmation; these technical pages do not specify them |
Power-source clarification: both primary tables print 600 W for XKP554E. This figure has been retained; 550 W has not been inferred from the model code. Confirm the supplied motor nameplate.
Individual hydraulic curve
| Flow Q (m³/h) | Head H (m) |
|---|---|
| 3 | 10 |
| 6 | 9 |
| 9 | 8 |
| 12 | 6 |
| 15 | 3.2 |
| 18 | 0.5 |
The individual curve connects this model’s explicitly published numerical Q–H values with straight segments. Unlisted cells remain unplotted. No extrapolation, zero-head flow, maximum-flow claim or unlisted shut-off head has been invented. The local and manufacturer tables agree on these values, but some family illustrations differ from the numerical rows; this is a table-point curve, not an attempt to reconcile those illustrations. Confirm the applicable version and required duty before selection.
Model-specific product dimensions
| Drawing symbol | Model value (mm) |
|---|---|
| DN1 | 48.5 / 50 |
| DN2 | 48.5 / 50 |
| L | 554 |
| W | 190 |
| H | 276 |
| L1 | 274 |
| L2 | 197 |
| H1 | 187 |
The figure uses the manufacturer’s product-style outline and this exact model’s dimensional row. Symbols A and B are retained without relabelling them as height or width. These are product dimensions, not package dimensions. DN1/DN2 retain the source’s paired 48.5 / 50 notation; confirm the supplied connector and mating pipe rather than inferring a thread specification. The product photograph is representative of this style; motor length, fittings, optional timer and supplied details may vary.
Confirm the required flow, head, liquid conditions and electrical supply with Krächtig before ordering. Price and availability on enquiry.