Products
LEO XZS100-65-200/150
LEO XZS100-65-200/150. Model selection, price and availability on enquiry.
LEO XZS100-65-200/150
Regional manual comparison — supplied version unconfirmed
The regional LEO operating manual, section 4, page 4, explicitly distinguishes input power from useful output power for XZS100-65-200/150. Its printed figures are shown separately below; they do not confirm the supplied motor or electrical edition.
| Regional reference field | Printed value |
|---|---|
| Input power | 16500 W |
| Useful output power | 15000 W |
Section 7.5, page 11, also prints overall length L = 823 mm for this exact model code. This corroborates the local printed length, but does not resolve the opposite length assignments in the European model sheets. That regional table does not provide W2 or m3, and its W field is a dash: none of those missing dimensions is inferred or substituted.
Model-specific technical reference
Stainless-steel standard centrifugal pump. Rated power: 15 kW; published hydraulic reference speed: 2900 r/min. AISI 304 pump body and impeller; motor protection IP55, insulation class F. Confirm actual electrical supply, motor nameplate, liquid compatibility and duty before ordering. The featured image represents the 9.2–22 kW large-frame design family, not an exact measured motor/frame; any additional gallery image is a general XZS family illustration.
Individual numerical hydraulic curve
| Flow Q (m³/h) | 0 | 42 | 48 | 60 | 72 | 90 | 108 | 114 | 120 | 126 | 132 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Head H (m) | 47 | 44 | 43 | 41 | 39 | 36 | 32 | 30 | 28 | 26 | 23 |
Printed model dimensions — version confirmation required
Dimensional source conflict — confirm before installation: the printed installation table gives W2=581, L=823 and m3=310 mm for this model. The manufacturer’s current European model sheet instead gives W2=625, L=868 and m3=354 mm; the /150 and /185 rows are reversed between these sources. The table and drawing below reproduce the printed version only and are not verified dimensions of the unit to be supplied. Obtain the exact motor/frame drawing before making a base or pipework.
| DN1 | DN100 (nominal) |
|---|---|
| DN2 | DN65 (nominal) |
| a | 100 mm |
| W1 | — (source dash) |
| W2 | 581 mm |
| L | 823 mm |
| L1 | 250 mm |
| L2 | 320 mm |
| m1 | 95 mm |
| m2 | 155 mm |
| m3 | 310 mm |
| m4 | — (source dash) |
| n1 | 254 mm |
| n2 | 314 mm |
| h1 | 180 mm |
| h2 | 225 mm |
| 4-S1 | — (source dash) |
| 4-S2 | 4×Ø14 mm |
| B1 | 60 mm |
| b | 14.5 mm |
| C1 | — (source dash) |
| C2 | 20 mm |
| X | 260 mm |
| Bmax | 350 mm |
| Hmax | 440 mm |
DN1/DN2 are nominal connection sizes, not measured clear bores. Other numerical dimensions are millimetres; bolt callouts retain source hole counts and diameters. A dash means the source does not specify that callout for this row, not a zero dimension. This large-frame original outline and exact standard-version row are used, not package dimensions or a neighbouring variant. Confirm flange mating, supplied motor and service clearances.
Source and selection qualifications
LEO XZS technical table (printed page 107), model-specific installation table and original large-frame outline (printed page 119), checked 16 October 2026. Straight lines connect published numerical points only: no interpolated test points, extrapolated zero-head endpoint, best-efficiency point or certified operating range has been invented. The manufacturer’s continuous-duty guidance depends on its full curve and actual installation; obtain duty confirmation before selection.
Model in the XZS Stainless Steel Standard Centrifugal Pump Range.
Confirm the required flow, head, liquid conditions and electrical supply with Krächtig before ordering. Price and availability on enquiry.