Products
LEO XZS80-65-160/92
LEO XZS80-65-160/92. Model selection, price and availability on enquiry.
LEO XZS80-65-160/92
Regional manual comparison — supplied version unconfirmed
The regional LEO operating manual, section 4, page 4, explicitly distinguishes input power from useful output power for XZS80-65-160/92. Its printed figures are shown separately below; they do not confirm the supplied motor or electrical edition.
| Regional reference field | Printed value |
|---|---|
| Input power | 12100 W |
| Useful output power | 11000 W |
This is an explicit 11 kW output reference, not evidence that the local 11 kW figure is input power for a 9.2 kW motor. The separate European 9.2 kW reference and the existing supplied-version qualification remain unresolved. Do not select protection, cables or a motor from either reference alone.
Model-specific technical reference
Motor-rating source conflict — supplied version unverified: the local printed technical table labels this /92 row 11 kW / 15 HP. The current European sheets rate the paired GB version at 9.2 kW; that is not proof of this EN733 version’s supplied motor. Do not infer an electrical rating from the suffix or treat either source as confirmation of the unit offered locally. Obtain the supplied motor nameplate and applicable technical revision before ordering or electrical design. The hydraulic points and dimensional row below reproduce the stated printed reference; no actual supplied motor rating is asserted.
Stainless-steel standard centrifugal pump. Supplied motor power remains unverified; published hydraulic reference speed: 2900 r/min. AISI 304 pump body and impeller; motor protection IP55, insulation class F. Confirm actual electrical supply, motor nameplate, liquid compatibility and duty before ordering. The featured image represents the 9.2–22 kW large-frame design family, not an exact measured motor/frame; any additional gallery image is a general XZS family illustration.
Individual numerical hydraulic curve
| Flow Q (m³/h) | 0 | 42 | 48 | 60 | 72 | 90 |
|---|---|---|---|---|---|---|
| Head H (m) | 33 | 31 | 30 | 28 | 26 | 23 |
Exact model installation dimensions
| DN1 | DN80 (nominal) |
|---|---|
| DN2 | DN65 (nominal) |
| a | 100 mm |
| W1 | 321 mm |
| W2 | — (source dash) |
| L | 823 mm |
| L1 | 212 mm |
| L2 | 280 mm |
| m1 | 95 mm |
| m2 | 155 mm |
| m3 | 260 mm |
| m4 | 210 mm |
| n1 | 254 mm |
| n2 | 320 mm |
| h1 | 160 mm |
| h2 | 200 mm |
| 4-S1 | 4×Ø14.5 mm |
| 4-S2 | 4×Ø15 mm |
| B1 | 65 mm |
| b | — (source dash) |
| C1 | — (source dash) |
| C2 | — (source dash) |
| X | 260 mm |
| Bmax | 350 mm |
| Hmax | 420 mm |
DN1/DN2 are nominal connection sizes, not measured clear bores. Other numerical dimensions are millimetres; bolt callouts retain source hole counts and diameters. A dash means the source does not specify that callout for this row, not a zero dimension. This large-frame original outline and exact standard-version row are used, not package dimensions or a neighbouring variant. Confirm flange mating, supplied motor and service clearances.
Source and selection qualifications
LEO XZS technical table (printed page 107), model-specific installation table and original large-frame outline (printed page 119), checked 16 October 2026. Straight lines connect published numerical points only: no interpolated test points, extrapolated zero-head endpoint, best-efficiency point or certified operating range has been invented. The manufacturer’s continuous-duty guidance depends on its full curve and actual installation; obtain duty confirmation before selection.
Model in the XZS Stainless Steel Standard Centrifugal Pump Range.
Confirm the required flow, head, liquid conditions and electrical supply with Krächtig before ordering. Price and availability on enquiry.