Products
LEO AP220
2.2 kW three phase peripheral pump for clean water. View this model’s curve and dimensions below. Price and availability by enquiry.
LEO AP220 Peripheral Pump
For clean-water transfer, domestic supply and sprinkler systems. Match the required operating flow and total dynamic head to this model's performance curve.
| Motor power | 2.2 kW |
|---|---|
| Motor phase | Three phase |
| Head at zero flow | 100 m |
| Last published duty point | 5.4 m³/h at 10 m |
| Suction / discharge | 1 inch / 1 inch |
| Body | Cast iron with anti-rust treatment |
| Impeller | Brass |
| Shaft | AISI 304 stainless steel |
| Maximum liquid temperature | 60 °C |
| Insulation / enclosure | Class F / IPX4 |
Zero-flow head is a shut-off value. It is not the recommended operating duty. Confirm motor voltage, frequency and local availability before ordering. The series lists up to 8 m suction lift; achievable lift depends on altitude, liquid temperature and pipe losses. Single-phase versions include motor thermal protection.
AP220 hydraulic performance
Redrawn from LEO's published table. Points are published values; straight lines interpolate between them. The curve is not extended beyond the published data.
AP220 published flow and head points
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 100 |
| 0.3 | 95 |
| 0.6 | 90 |
| 0.9 | 85 |
| 1.2 | 80 |
| 1.5 | 75 |
| 1.8 | 70 |
| 2.1 | 65 |
| 2.4 | 60 |
| 3 | 50 |
| 3.6 | 40 |
| 4.2 | 30 |
| 4.8 | 20 |
| 5.4 | 10 |
AP220 dimensions
Manufacturer outline and dimensions for AP220. Outline is not to scale.
| L | 338 mm |
|---|---|
| W | 165 mm |
| H | 210 mm |
| L1 | 56 mm |
| L2 | 100 mm |
| L3 | 9 mm |
| W1 | 125 mm |
| H1 | 86 mm |
| DN1 / DN2 | 1 inch / 1 inch |