Products
LEO APm220
2.2 kW single phase peripheral pump for clean water. View this model’s curve and dimensions below. Price and availability by enquiry.
LEO APm220 Peripheral Pump
For clean-water transfer, domestic supply and sprinkler systems. Match the required operating flow and total dynamic head to this model's performance curve.
| Motor power | 2.2 kW |
|---|---|
| Motor phase | Single phase |
| Head at zero flow | 100 m |
| Last published duty point | 5.4 m³/h at 10 m |
| Suction / discharge | 1 inch / 1 inch |
| Body | Cast iron with anti-rust treatment |
| Impeller | Brass |
| Shaft | AISI 304 stainless steel |
| Maximum liquid temperature | 60 °C |
| Insulation / enclosure | Class F / IPX4 |
Zero-flow head is a shut-off value. It is not the recommended operating duty. Confirm motor voltage, frequency and local availability before ordering. The series lists up to 8 m suction lift; achievable lift depends on altitude, liquid temperature and pipe losses. Single-phase versions include motor thermal protection.
APm220 hydraulic performance
Redrawn from LEO's published table. Points are published values; straight lines interpolate between them. The curve is not extended beyond the published data.
APm220 published flow and head points
| Flow (m³/h) | Head (m) |
|---|---|
| 0 | 100 |
| 0.3 | 95 |
| 0.6 | 90 |
| 0.9 | 85 |
| 1.2 | 80 |
| 1.5 | 75 |
| 1.8 | 70 |
| 2.1 | 65 |
| 2.4 | 60 |
| 3 | 50 |
| 3.6 | 40 |
| 4.2 | 30 |
| 4.8 | 20 |
| 5.4 | 10 |
APm220 dimensions
Manufacturer outline and dimensions for APm220. Outline is not to scale.
| L | 395 mm |
|---|---|
| W | 170 mm |
| H | 235 mm |
| L1 | 56 mm |
| L2 | 123 mm |
| L3 | 12 mm |
| W1 | 140 mm |
| H1 | 96 mm |
| DN1 / DN2 | 1 inch / 1 inch |