Products
LEO LGP20-T
LGP20-T petrol trash-water pump, GX160 engine, published engine power 5 HP. Confirm the actual liquid, solids and operating duty with Krächtig.
LEO LGP20-T petrol trash-water pump
Water supply, drainage and irrigation for clean or trash water. The manufacturer lists a 22 mm maximum particle diameter; actual suitability depends on solids type, concentration and liquid compatibility. This is the exact LGP20-T engine option, not a standard clean-water or high-head version. The product photograph represents the trash-pump family; engine and pump configuration vary by model.
Model specifications
| Engine designation | GX160 |
|---|---|
| Engine type | Single-cylinder, four-stroke, air-cooled |
| Manufacturer-published engine power | 5 HP; confirm supplied engine rating/nameplate |
| Rated engine speed | 3600 rpm |
| Displacement | 163 cm³ |
| Fuel tank capacity | 2.8 L |
| Engine oil capacity | 0.55 L |
| Inlet / outlet | 2″ / 2″ |
| Liquid temperature | 0–40 °C |
| Maximum particle diameter | 22 mm, subject to particle type and operating conditions |
| Maximum suction lift | 8 m, subject to installation conditions |
| Manufacturer suction reference | 5 m suction in 120 s under source test conditions |
| Pump body | Aluminium alloy |
| Impeller | Anti-rust cast iron |
Follow the supplied engine and pump manuals for fuel, lubrication, priming, installation and cleaning. Confirm the required flow/head and actual solids before selection.
LGP20-T individual hydraulic curve and dimensional drawing
Published hydraulic points
| Flow Q (m³/h) | Head H (m) |
|---|---|
| 0 | 25 |
| 5 | 24.1 |
| 10 | 22.5 |
| 15 | 20.6 |
| 20 | 18.6 |
| 25 | 16.1 |
| 30 | 13.5 |
| 35 | 10 |
| 40 | 6 |
Dots reproduce the manufacturer table. Lines show straight interpolation between listed points only. No zero-head endpoint or extra flow points are assumed, and the final listed flow is not a stated maximum flow.
Model dimensions
| DN1 / DN2 | 2″ / 2″ |
|---|---|
| L | 675 mm |
| W | 502 mm |
| H | 446 mm |
| H1 | 350 mm |
| H2 | 385 mm |
Confirm the supplied pump configuration and installation clearances before ordering.